Mag Drill HSS Cutter buyer info: BLACK BLUEROCK BRM-35A – In case you’re looking for something with a good drilling capacity and consistent performance, the BRM-35A model might be a good solution. It comes with a free chuck, oil bottle, adapter, safety chain, and a hard case. Its 110V motor is able to deliver up to 570 RPM which is more than enough to drill through tough materials. On top of that, this model uses a standard 3/4? Weldon Shank which is a good thing because it can be found easily in almost any hardware store. The design is a pretty standard one, although there are some things that should be pointed out. The first thing most people notice is the simplicity. In simpler terms, everything is at reach and positioned well. Two on/off switches are located on the side of the machine, one is for the machine itself, while the other regulates the magnet. As far as the magnetic aspect goes, the electromagnet works fine and performs as advertised. Bluerock might not be the most well-known brand out there, but they do produce relatively good machines, especially mag drills.
At the top of the list is this 10 amp motor drill that has two-speed settings of 300 to 450 revolutions per minute. It has safety features: the overload protection electronics which helps prevent damage to the motor. The chuck system can be easily changed. It is ideal for heavy duty application from the 4 3/8 inches drill travel. Finally, the drills magnetic coolant bottles can be placed on either side of the drill on a work surface to keep the drill from overheating.
A magnetic drill is a special drill used to cut metals. It is made of four major parts: a drill stand, motor, arbor or chuck, and a magnetic base. Unlike a bench top drill or a standing press drill, the magnetic drill is useful especially in areas that are hard to access like vertical metal parts that are stationary. The other reason why it is the better option is that it gives you precise and speed drilling that is very accurate and consistent. The magnetic base enables it to adhere to carbon steel when it is turned on. See more details at Rotabroach.
Milwaukee 4208-1 Electromagnetic Drill Press is manufactured in the United States. It can perform heavy duty drilling and can handle the toughest drilling jobs with up to a ¼ inch threaded holes capacity. With no load, the two-speed motor can run at 250 and 500 rpm. It can pressurize about 1670 pounds on a 1-inch of the plate. Milwaukee 4208-1 Electromagnetic Drill Press is a combination of Milwaukee’s 4203 adjustable base and the 4262-1 electromagnetic drill press. Thus Adjustment of support is super easy. This first drill press is made for professional grade job work. It equipped with professional grade feature which ensures versatile usage to perform any job work.
If value for money is a priority to you, take a look at this drill from Evolution. It is a solid and durable drill that will get the job done for the professional steelworker as well as the weekend handyman. This drill has a 6-inch stroke length and comes with a 0.5-inch chuck and key. The drilling range has a diameter from 7/16? to 1-1/8? and cutting depth of 2 inches unless you change out the chuck to something else. You can place the feeding handle on either side of the drill, depending on what is comfortable to you. The heavy-duty magnet makes it easy to do overhead or horizontal drilling. An integrated cooling system will keep your magnetic drill press from overheating. There are some drawbacks to this drill. It can only turn at the speed of 570 RPM. This works great for when you are drilling steel or aluminum, but this speed is too high for drilling titanium or stainless steel. This drill may also be more primitive than conventional high-end magnetic drill presses.