Sludge dewatering decanter wholesale manufacturer and supplier right now: The use of three-phase separation technologies is rising in the separation industry. When it came to separating oils and water, the industry particularly needed high-efficiency three-phase decanter centrifuges. Shenzhou Machinery Company has over 50 years of experience in the separation field, which they used to develop the 3 Phase decanter centrifuge. Its primary use is in solving the problem of simultaneous immiscible liquid and solid phase separation using the specific gravity difference. The need for stable, continuous operation around the clock can be met by the 3 Phase decanter centrifuge thanks to its mature design and high-quality raw material selection. Find extra info at disc bowl centrifuge.
The most important factor to keep in mind when manufacturing decanter centrifuge components or designing a completely new decanter assembly using a cone centrifuge parts casting machine is that the decanter bowl and tube wall thickness must be thin enough to meet design specifications while still providing each Structural integrity required for components. Stainless steel cylinders and conical bowls for decanter centrifuges are manufactured from the centrifugal casting process. Decanter Bowls, Bowl Cones, and Bowl Cylinders are typically made in various dimensions through centrifugal casting and additional machining. These can be purchased as a single part or already assembled/welded with a stainless-steel cylinder.
The variable pump impeller technology can adjust the thickness of the liquid layer inside the machine while it is running, so that the Decanter centrifuge can be quickly adjusted without stopping to achieve separation effect. New independent drive system. The structural feature of the new independent drive system is that the drive of the rotary cylinder and the screw are respectively driven by two vertical variable frequency motors. A new type of gearbox is used to connect the drum and the screw. In addition to withstanding high torque, this gearbox can also independently rotate the screw without the drum rotating. Through the above discussion and analysis, it is not difficult to see that the influence of structural design on the processing capacity of decanter centrifuge is mainly reflected in the selection and design of mechanical parameters and corresponding auxiliary equipment. If each problem is considered comprehensively and concretely, it can also be considered comprehensively and concretely. The decanter centrifuge can better serve the solid-liquid separation field of various industries in our country.
The fundamental principles of operation for the 2 phase decanter centrifuge and 3-phase Shenzhou Machinery decanter centrifuges are identical to those of the horizontal decanter centrifuge. To separate substances with different densities, the equipment uses a high-speed rotating assembly to create an acceleration inside the bowl that is thousands of times stronger than gravity. Then, the relative motion between the bowl and the screw is generated by the differential gearbox, allowing for the separation of the substances. In contrast, 3 phase decanter centrifuges use centripetal pump technology to achieve solid-liquid-liquid three-phase separation, as opposed to Shenzhou Machinery 2-phase centrifuges, which are utilized for solid-liquid two-phase separation and discharge the solid slag and separation liquid from an opening at the bottom of the equipment collection box. Under the pressure of the centripetal pump, the heavy liquid phase is discharged through the flow outlet on the impeller. In contrast, gravity sends the solid slag and light liquid phase down from the bottom opening of the equipment collection box.
Deciding on a decanter centrifuge for laboratory use, particularly among 2-phase and 3-phase centrifuges, calls for a deep understanding of the lab’s desires. This relies on the knowledge to be processed, desired efficiency, area constraints, and budget. 2-phase decanter centrifuges are versatile because they separate solids from liquids without problems. But, 3-phase models, which separate immiscible beverages and solids, are exceptional for complex separations. This guide provided the necessary information regarding decanter centrifuges and their basic features, workings, and evidence comparison. Two immiscible liquids or a liquid and solid can be separated using the two-phase centrifuge. The separation happens automatically and in real-time, without human intervention. Environmental protection, sewage treatment, the chemical industry, food processing, fermentation, medicine, and mining metal and non-metal minerals are just a few of the many applications for two-phase centrifuges. Read extra details at https://www.lnszjx.com/.
Rotating cone angle: the cone angle has a significant impact on the performance of solid flow rate. Due to the effect of centrifugal force, when particles reach the inner wall of the rotary drum and are transported forward by the spiral, they also have a tendency to flow backward. The speed of backward flow is related to the spiral angle, and finally reflected in the cone angle. Both have a direct impact on the conveying performance of solid particles, that is, as the reflux speed increases, the solid conveying speed decreases. The robustness of materials is reflected in the speed of the centrifuge, which directly affects the volumetric flow rate and mass flow rate. In addition, the corrosion of the centrifuge is also related to its material structure.