Automatic control valve manufacturer and supplier right now: Founded in 2004, SUOTE VALVE is one of the leading valve manufacturer and water treatment solutions provider. With years’manufacturing experience, we now could offer more than 45 series valves and related parts, such as hydraulic control valve, gate valve, butterfly valve, check valve, pressure reducing valve and so on. Most of our certificated products sell to over 36 cities in Europe, North America, South America, Africa, etc. With years’ manufacturing experience, we now could offer more than 45 series valves and related parts. Spare parts will be provided at cost price. With the expansion of the international market, We are inviting more overseas partners to join us.You’re welcome to work with us. Find additional details at industrial valve manufacturer.
Solenoid control valve is an on-off control valve that either opens or closes upon receiving an electrical signal to the solenoid pilot control. This valve consists of a main valve and a two-way solenoid valve that alternately applies pressure to or relieves pressure from the diaphragm chamber of the main valve. It is furnished either normally open (de-energized solenoid to open) or normally closed (energized solenoid to open). Liquid level control can be provided by using a float switch or electrode probe which sends an electrical signal to open or close the valve as needed. As one of the best solenoid control valve manufacturers, industrial uses for our automatic solenoid valve are many and include accurate control of process water for batching, mixing, washing, blending or other on-off type uses.
Industrial Processes: Many industrial processes require precise control over liquid levels to maintain efficiency and safety. Altitude valves can be found in various industries such as manufacturing, food processing, and chemical plants, where they regulate liquid levels for optimal operation. Sewage Treatment Plants: Altitude valves are also used in sewage treatment plants to manage the level of wastewater within specific compartments or tanks. By preventing overflows or emptying too quickly, these valves contribute to effective treatment processes. Plumbing Systems: In buildings with multiple floors or complex plumbing setups, altitude valves are installed to balance the pressure between different sections of the system while ensuring consistent supply throughout.
NSCV- Non Slam Check Valve is used as protection against reverse flow when power failure in areas where noise pollution or water hammering is a critical issue. It can provide not only quiet performance but also low head loss. Features: High strength ductile iron body used for durability and less weight; Advanced dynamic design of single body with diffuser provides streamline flow and assures lower head loss; One of the lowest head loss check valve, big save in pumping power cost, valve disc with shorter stroker and spring reverse faster than most of check valve; Coated with powder epoxy both inside & outside for corrosion resistance; Bronze bushing reduce wearing problem during operation; Hydrodynamic design with spring ensures non slamming and water hammerless; Stainless steel spring hidden in the diffuser under protection while valve in operation; Disc will positively close before reverse flow, and maximize the closing speed up to 0.2 Sec; Installation can be vertical/horizontal/ inclined. For size DN800 and up preferred vertical installation. ·Comply with EN 558-1, ISO 5752 and EN 1092-2, ISO 7005-2 flange dimension. Find more info on shsuotevalve.com.
What is an Altitude Valve? An altitude valve, also known as an altitude control valve or altitude regulator, is a type of valve used in water distribution systems. It is designed to maintain a specific water level or pressure within a storage tank or elevated structure. The purpose of an altitude valve is to control the flow of water into or out of a storage tank to maintain a predetermined level or pressure. It functions by automatically opening and closing based on changes in water level or pressure. When the water level or pressure drops below the desired set point, the altitude valve opens to allow water to flow into the tank, replenishing the supply. Conversely, when the water level or pressure rises above the set point, the valve closes to prevent overfilling or excessive pressure.
FBGD is a double eccentric flange butterfly valve, with soft seal on the body, it has the lowest operational torque, much less wearing, the dovetail seal design has been proven over half century service with reliability. Features: The butterfly valve is made of DI body and DI disc; Advanced newly design with dovetail seal design and captured by epoxy on the back, with multiple raised ring to have more contact with disc but less friction during closure; The double eccentric design provides less contact area of seal with disc, and less stress at the open position of the disc; The disc design with arch shape and thru disc can provide better flow capacity, stronger and less weight . The shaft and disc connection with tangential pin which can be exchangeable and provide rigid connection. The DN 100-500MM use flat disc, and DN 600-1200MM use arch shape disc; Epoxy coated interior and exterior. Valve design meets or exceeds EN 593; Top flange connection meets ISO 5211-1982, and F/F meets EN 558-1 series 13 & 14.