Top rated coriolis meters provider: Useful for Gases and Liquids: Mass flow meters can be used for both gases and liquids. They are commonly used in applications where precise control over mass flow is necessary, such as chemical processing, gas distribution, and HVAC systems. Because mass flow meters measure mass directly, they are less affected by temperature and pressure variations. They are frequently used when the fluid’s temperature and pressure are subject to significant fluctuations. See even more information at coriolis flow meter.
To calculate the steam mass flow from the frequency signal output by the frequency output vortex flowmeter, you only need to know the current working condition of the fluid, while the temperature and pressure compensation of the analog output vortex flowmeter is only the error caused by the deviation of the current working condition from the design working condition. Compensation, therefore, not only need to know the current conditions, but also need to know the design conditions. The data of the latter working condition often causes errors due to the loss of data due to the passage of time or personnel changes. In contrast, the frequency output vortex flowmeter does not have this problem.
Second, the gas turbine flow meter equipment has strong functions, low power consumption and superior performance. When it is sold in the industry, it is found that the functional advantages of this kind of flowmeter will be more perfect. In many gas distribution stations or gas When promoting in the station, I found that the advantages will be more diversified, and there are more and more advantages. Third, the configuration of the natural gas turbine flow meter instrument is more perfect, and it will be more and more widely used. As long as you take a fancy to the above clarity, it will be more convenient in the process of normal use. After this is used in many gas distribution stations, it is found that the measurement accuracy is higher.
Fork density meter can measure the density, concentration, gravity, temperature, and accuracy of liquids without being affected by temperature, pressure, density, and viscosity. Applications of micro motion fork density meter: Pipeline interface inspection, slurry solids monitoring and corrosive acid concentration control; density and concentration monitoring that require rapid response. Continuously measure pipelines in real-time through pipelines and storage tanks to increase installation flexibility and choose from a variety of corrosion-resistant materials to measure the density and concentration of key chemicals. Supports protocols connected to DCS, PLC and flow computers. Pass Hazardous Area Approved Head-Mounted Transmitters extend the range of use, the transmitter supports local configuration and display. See even more information at https://www.bjssae.com/.
Beijing Sincerity is the leader of the coriolis mass flow meters industries in China,who specialized in producing thermal mass flow meter,turbine flow meter,fork density meters and ultrasonic flow meter. In line with our collaborative approach to our customers we are also able to discuss tailor-made Service and Support Solutions designed specifically for your needs that can include such topics as training, instrument replacement agreements and instant service and repair.
The output of the vortex flow meter is only proportional to the flow rate of the fluid flowing through the measuring tube. When measuring wet saturated steam, the influence of water droplets on the output of the vortex flow meter is negligible, so it can be considered that the output of the vortex flow meter is entirely composed of It is caused by wetting the dry part (saturated part) of each steam, and the density of the dry part can be accurately detected by pressure compensation or temperature compensation. When steam is measured, if the two parties agree to settle the fee according to the dry part of the steam, and the condensed water is not charged, the impact on the relative measurement is negligible and can be ignored; if the condensed water is also charged according to the steam, the measurement result of the vortex meter is low.
The Insertion Density Meters are equiped with the microprocessors inside, so the sensor could complete the signal conditioning, calculation and diagnosis functions, and it does not need the remote eletronic devices for processing. Typical industries applied include the petrochemical industiry, electricity power industry, wine industry, food industry, pharmaceutical industry, and mineral processing (such as, clay, carbonate, silicate, etc. ) For sepecific applications, the Insertion Density Meters are largely used in the interface detection of the multi-product production lines, density detection of the mixed liquid, end monitoring of the reaction kettle, and the separator interface detection.